Skip to content
Free ground shipping for all orders over $100!

10% off site wide through 4-30 use code | EXPO_10
Free ground shipping for all orders over $100!

10% off site wide through 4-30 use code | EXPO_10
Quick Tech ™©® : Plumb-It-In Plumb-It-In

Quick Tech ™©® : Plumb-It-In Plumb-It-In

A bit longer of a Quick Tech ™©® video for you! Follow along as James shows you how to remove the reservoir tank and install La Marzocco plumb-in kit for your Linea Mini! You might have to watch this one a couple times but that catchy tune will help get you through it! Tools: - Flathead Screwdriver - Phillips Screwdriver (long) - 7mm wrench - 2 Adjustable wrenchs Steps - Remove drain box and disconnect reservoir - Remove cup tray and spill guard - Disconnect control board from frame - Disconnect thermostat from frame - Remove front screws - Loosen back corner screws - Remove back panel - Remove plastic reservoir supply line - Install new stainless supply line - Reinstall back panel, control board, and thermostat - Remove drain plug and install new drain fittings - Connect machine to water filter and drain Plumbing in your Linea Mini takes a little time but it’s easy to do with a little help from our Quick Tech ™©® video.
Previous article Quick Tech ™©® : Pressure Relief with La Marzocco’s Linea PB
Next article Quick Tech ™©® : Breaker Breaker - Linea Mini