Mahlkönig Parts

275123 Special Steel Grinding Burrs for Mahlkonig K30, E65S, and E65S Grind-by-Weight. 65mm. Old part number 306715

703804 Mahlkönig EK43 Premium Cast Steel Burrs 98mm Old part number 303931 EK43 Part Diagram Mahlkonig Resource Page

702926 1.5kg/3.31 lb standard size hopper available in Clear, Black or White variants for Mahlkönig EK43, EK43 S, EKK43, Peak, K30 2.0, K30 ES/Vari...

Metal flapper upgrade for your Mahlkonig E80 or E65 espresso grinder. Add this stainless steel flapper to help extend the life of the silicone flap...

700476 Mahlkonig EK43 Static Guard Contact Strip Old part # 301106

701619 Mahlkönig E80S, E80S GbW, PEAK Special Steel Burrs 80mm.

1000 Gram Scale Calibration Weight  Used for calibrating Grind By Weight model grinders 1000 Grams 1 Kilogram  

704024 E80 Supreme Flapper Upgrade kit includes silicone and metal flappers.

702927 Single flapper for Mahlkonig K30, K30 2.0, K30 Twin, K30 Twin 2.0, K30 ES/Vario, and K30 Vario Air. Old part number(s): 310139, 243558 Mahlk...

700974 Pulling tool to remove the rotating burr carrier for 65mm burrs on Mahlkönig E65S, E65S GbW.

702934 Silicone bean hopper gasket for Mahlkonig Grinders Fits Models: E65S E65S GbW PEAK K30 2.0 K30 ES/Vario K30 Vario Air EK43 EK43 S EKK43 O...

703753 Mahlkönig bean hopper 0.25 kg black. Compatible with all EK43, K30, Tanzania models. Old Part Number 701553 EK43 Part Diagram Mahlkonig Reso...

104590 Mahlkönig K30 grind adjustment lock service pack Old Part number 307861

701856 Metal and silicone flapper set for Mahlkönig E65S, E65S GbW. Old part number 701543

703751 Mahlkönig spout gasket for EK43, 200-240 VAC. Old part number 302803 EK43 Part Diagram Mahlkonig Resource Page

703754 Mahlkönig 500 Gram Hopper Old Part Number 101388 Compatible with EK43, K30, Tanzania models 

703538 Shear plate for Mahlkonig Kenia, Guatemala. Old part number: 303864

This tool lets you align the burrs on your EK43 and calibrate your grind with ease. Aligment tool spec sheet Alignment tool instruction guide

703562 71mm flat steel burrs for Mahlkönig Guatemala 710, 710 Lab and 710 F. These will NOT fit the Guatemala Lab, or Kenia grinders. Old Part Num...

104948 MK Peak Grinding Fixed Burr Carrier

Mahlkonig EK43 Shear Plate Thicker Shear plate is for grinders produced before February 2020 (3.9mm) Thinner shear plate is for grinders produced a...

704082 Mahlkonig Peak Silicone Flapper 20.5 Old part number 103576

310673 MHK K30 FAN

302365 Mahlkonig On/Off Switch 100-115V Fits Models: Kenia / Guatemala / Old Style EK43 Other Part Number(s): 702981, 302375, 105724

703775 Starting capacitor, 550 µF, 100-120VAC for EK43, EK43 S and EKK43. Old Part Number 101846.

701798 EK43 ADJUSTMENT CAP OLD PN: 305457 Compatible with Mahlkonig EK43 - Includes set screws Mahlkonig Resource Page

306720 Mahlkonig K30 Microswitch Service Pack

700479 Mahlkonig Fastening Bag Holder Lever Kit Includes 301982 Spring (x1), Axle (x1) and Circlip (x2)

104591 MK Fine adjustment adapter service pack

703298 Grind-by-Weight Loadcell for Mahlkönig E65S GbW, E80S GbW.

703328 Bean hopper 1.2 kg with lid for Mahlkönig E65S, E65S GbW, E80S, E80S GbW. Old part number 700610.

703092 Mahlkonig E80T/E80S/E80GBW Silicone Flapper

705008 Centrifugal Force Switch for Mahlkönig EK43, EK43 S. Old part number 305472, 302546 Ek43 Part Diagram (old version 2013) Mahlkonig Resource...

308383 CIRCUIT BREAKER K30

104765 Mahlkonig K30 Fixed Burr Carrier Assembly Ek11B Old Part Number: 230896

303916 Grinding Burrs for Mahlkönig VTA6 SW Single Phase Retail Grinder.

705227 Mahlkönig Kenia and Guatemala Lab 65mm Grinding Burrs. Important note regarding placement- The two burrs have different inside diameters. Th...

702520 Short wire potentiometer for double shot button on Mahlkönig K30 ES/Vario, K30 Vario Air. SN 12414 and higher Old part number 307501

703603 Spout hardware kit for Mahlkönig Guatemala 2.0

101066 Burr Change Tool EK11b101066 Mahlkonig Burr Change Tool for K30, K30 Twin, Peak, EK11

308013 Mahlkonig Power Supply Board K30 Twin 120V/60HZ **Special Order Only 

101177 COMPLETE GRINDER CASING SET WITH SILICONE FLAPPER FOR 100-127 VAC COMPATIBLE WITH K30 VARIO, K30 2.0, K30 TWIN and K30 TWIN 2.0

702929 Hopper slide for the 0.8 kg bean hopper on the Mahlkönig EK43, EK43 S, EKK43, K30 Twin and K30 Twin 2.0. Not for use with standard size ho...

703792 Grounds Tray for EK43, EK43 S, EKK43. Old Part Number 701300.

700995 Mini Hopper, 250g capacity, for Mahlkonig E80S, E80S GbW, E65S, E65S GbW.

703738 Mahlkönig X54 Premium Special Steel Burrs 54mm.

308041 Mahlkönig Knob Grind Adjustment Lock