Skip to content
Free ground shipping for all orders over $100!

10% off site wide through 4-30 use code | EXPO_10
Free ground shipping for all orders over $100!

10% off site wide through 4-30 use code | EXPO_10
Quick Tech ™©® : Mahlkonig Calibration 2.0

Quick Tech ™©® : Mahlkonig Calibration 2.0

Quick Tech ™©® : Mahlkonig Calibration 2.0

There’s more than one way to catch a cat…or something like that! That’s right we’ve got options when it comes to calibrating the grind on your Mahlkonig E65 or E80. Some say this method is slightly faster, some say it’s easier to comprehend. It doesn’t matter to us what your preferred method is, were just glad Josh is here to give us the details!

Tools:

  • Flathead Screwdriver 

Steps

  • Close hopper slide and remove hopper
  • Loosen Flathead screws
  • Twist to unlock and remove grinder lid
  • Press adjustment collar lock tab
  • Lift Adjustment collar straight up
  • Rotate Adjustment collar counter clockwise
  • Reinstall collar to collar at coarsest setting
  • Use screwdriver to turn burrs clockwise
  • Push collar clockwise until you hear burrs touch
  • Press lock tab and remove adjustment collar
  • Align “zero” indicator marker on grinder with center point on collar
  • Reinstall grinder lid and hopper

Thanks for watching our Quick Tech ™©® videos! Be sure to reach out to our tech support team if you have any questions before getting started, we’re always happy to help! 

Previous article Quick Tech ™©® : Mahlkonig E80 Flapper Upgrade
Next article Quick Tech ™©® : Kegerator Clean Out!