QuickTech ™️©️®️: Flapper Upgrade for Stable Ground(s) on the Mahlkonig E80 Supreme

Do those grounds feel unstable? Are you clumped for answers? Are the fines just not fine enough? Thankfully this weeks QuickTech ™️©️®️ is here to guide you through bringing some stability to those grounds! Daniel is here with the Mahlkonig E80 Supereme

Tools:

- Mahlkonig E80 Flapper Upgrade

- Flathead Screwdriver

Steps:

· Close the hopper and grind off any remaining coffee.

· Turn the grinder off.

· Turn the hopper counter clockwise to remove the hopper.

· Using a flathead screwdriver untighten the collar locking screws.

· Turn the collar counter clockwise to unlock and lift off the grinder lid.

· Remove the flapper and replace with the new silicone and metal flapper.

· Place the collar back on turning right to lock into place.

· Tighten the collar lock screws.

· Place the grinder back in place, open the chute, turn on the grinder, and grind with a stable mind.

Now your espresso will have some stable ground(s) to stand on with this Black Rabbit QuickTech ™️©️®️ Tech Tip!